Simulated Diamonds<\/h2>\n\n\n\n![\"Lab](\"https:\/\/www.cleanorigin.com\/blog\/wp-content\/uploads\/2023\/08\/2-rings-white-gold-1024x538.jpg\")
Lab Diamond Engagement Rings<\/figcaption><\/figure>\n\n\n\nWhat is a diamond simulant? Simply put, a diamond simulant is a non-diamond masquerading as a diamond. In other words, it\u2019s a stone or other material that mimics the general appearance of a diamond but does not have the same physical or chemical properties.<\/p>\n\n\n\n
You\u2019ve likely heard of a few different kinds of diamond simulants, including cubic zirconia<\/a> and moissanite<\/a>. Man-made diamond simulants are common. However, there are also a few natural gemstones that can fall into this category because of their clear, colorless appearance. These include quartz and white sapphire.<\/p>\n\n\n\nSynthetic Diamonds<\/h2>\n\n\n\n![\"Lab](\"https:\/\/www.cleanorigin.com\/blog\/wp-content\/uploads\/2023\/08\/comaprison-1024x538.png\")
Lab Grown and Mined Diamond Comparison<\/figcaption><\/figure>\n\n\n\nSynthetic diamonds, on the other hand, are chemically, physically, and optically the same as mined diamonds. To reiterate: A synthetic diamond is a real diamond.<\/p>\n\n\n\n
Also known as lab grown diamonds<\/a>, man-made diamonds, or cultured diamonds, these diamonds have the same chemical composition, brilliance, and unyielding hardness as natural diamonds<\/a>. The only difference is that synthetic diamonds are created in laboratories. The growth process goes under controlled conditions that mimic the same natural processes that create diamonds deep beneath the ground. Furthermore, lab grown diamonds display components that make them indifferent from naturally formed diamonds.<\/p>\n\n\n\nThe most common types of synthetic diamond synthesis are Chemical Vapor Deposition (CVD diamonds) and High Pressure High Temperature (HPHT diamonds). These processes use different quantities of diamond seeds, pure carbon atoms and create a multitude of diamond crystals.<\/p>\n\n\n\n
Interestingly enough, although lab grown diamonds are synthetic (meaning man-made rather than naturally occurring), the Federal Trade Commission has actually ruled it deceptive<\/a> to classify a lab created diamond as \u2018synthetic\u2019 since this term can be misleading. They want to ensure that buyers of lab diamonds know that they are getting the real thing rather than a poor substitute. For the most part, you will find these diamonds labeled by one of their more appropriate names: lab grown diamonds, man-made diamonds, or lab created diamonds.<\/p>\n\n\n\n\nShop Lab Grown Diamond Jewelry<\/a><\/div>\n<\/div>\n\n\n\nHow Do You Tell the Difference?<\/h2>\n\n\n\n![\"Bezel](\"https:\/\/www.cleanorigin.com\/blog\/wp-content\/uploads\/2023\/08\/10-1024x538.jpg\")
Bezel Setting<\/a><\/figcaption><\/figure>\n\n\n\nThere are various properties with each type of stone that will allow you to tell if it is a diamond simulant or a synthetic diamond (even a natural diamond).<\/p>\n\n\n\n
Durability<\/h3>\n\n\n\n
Natural diamonds, and therefore synthetic diamonds, are the hardest minerals found on earth. On the Mohs Scale of hardness, they score a perfect 10. This means that the only thing that can scratch a diamond is another diamond.<\/p>\n\n\n\n
Moissanite, one of the most popular diamond simulants, is a fairly hard mineral. It, however, is not as hard as a real diamond. On the scale, they score a 9.25, meaning they can be scratched by other elements. Cubic zirconia, on the other hand, scores an 8.5. This means it is much softer than a diamond and can easily be scratched. Those who use these simulants in rings or other jewelry may discover that the stones end up looking kind of beat up after extended wear.<\/p>\n\n\n\n
Refractive Index<\/h3>\n\n\n\n
In technical terms, the refractive index describes the speed of light as it slows down to pass through a transparent or semi-transparent material. In layman\u2019s terms, and when it comes to a diamond simulant and synthetics, it basically describes how the stone will reflect light.<\/p>\n\n\n\n
The refractive index of a diamond is 2.4. This means that light travels through a diamond at a rate 2.4x slower than it does through air. Now, this is still far too fast for the eye to really capture, but the speed of the light as it passes through the stone can have some interesting effects on the shine of the stone. In comparison, the refractive index of moissanite is anywhere from 2.65-2.69. This can actually cause the stone to give off a \u2018disco-ball\u2019 appearance, as the shine can be overbearing at times. Since cubic zirconias are lower on the index than diamonds(sitting at 2.15-2.18), they reflect an excess of colored light, resulting in a \u2018rainbow effect.’<\/p>\n\n\n\n
What is a diamond simulant? Simply put, a diamond simulant is a non-diamond masquerading as a diamond. In other words, it\u2019s a stone or other material that mimics the general appearance of a diamond but does not have the same physical or chemical properties.<\/p>\n\n\n\n
You\u2019ve likely heard of a few different kinds of diamond simulants, including cubic zirconia<\/a> and moissanite<\/a>. Man-made diamond simulants are common. However, there are also a few natural gemstones that can fall into this category because of their clear, colorless appearance. These include quartz and white sapphire.<\/p>\n\n\n\n Synthetic diamonds, on the other hand, are chemically, physically, and optically the same as mined diamonds. To reiterate: A synthetic diamond is a real diamond.<\/p>\n\n\n\n Also known as lab grown diamonds<\/a>, man-made diamonds, or cultured diamonds, these diamonds have the same chemical composition, brilliance, and unyielding hardness as natural diamonds<\/a>. The only difference is that synthetic diamonds are created in laboratories. The growth process goes under controlled conditions that mimic the same natural processes that create diamonds deep beneath the ground. Furthermore, lab grown diamonds display components that make them indifferent from naturally formed diamonds.<\/p>\n\n\n\n The most common types of synthetic diamond synthesis are Chemical Vapor Deposition (CVD diamonds) and High Pressure High Temperature (HPHT diamonds). These processes use different quantities of diamond seeds, pure carbon atoms and create a multitude of diamond crystals.<\/p>\n\n\n\n Interestingly enough, although lab grown diamonds are synthetic (meaning man-made rather than naturally occurring), the Federal Trade Commission has actually ruled it deceptive<\/a> to classify a lab created diamond as \u2018synthetic\u2019 since this term can be misleading. They want to ensure that buyers of lab diamonds know that they are getting the real thing rather than a poor substitute. For the most part, you will find these diamonds labeled by one of their more appropriate names: lab grown diamonds, man-made diamonds, or lab created diamonds.<\/p>\n\n\n\n There are various properties with each type of stone that will allow you to tell if it is a diamond simulant or a synthetic diamond (even a natural diamond).<\/p>\n\n\n\n Natural diamonds, and therefore synthetic diamonds, are the hardest minerals found on earth. On the Mohs Scale of hardness, they score a perfect 10. This means that the only thing that can scratch a diamond is another diamond.<\/p>\n\n\n\n Moissanite, one of the most popular diamond simulants, is a fairly hard mineral. It, however, is not as hard as a real diamond. On the scale, they score a 9.25, meaning they can be scratched by other elements. Cubic zirconia, on the other hand, scores an 8.5. This means it is much softer than a diamond and can easily be scratched. Those who use these simulants in rings or other jewelry may discover that the stones end up looking kind of beat up after extended wear.<\/p>\n\n\n\n In technical terms, the refractive index describes the speed of light as it slows down to pass through a transparent or semi-transparent material. In layman\u2019s terms, and when it comes to a diamond simulant and synthetics, it basically describes how the stone will reflect light.<\/p>\n\n\n\n The refractive index of a diamond is 2.4. This means that light travels through a diamond at a rate 2.4x slower than it does through air. Now, this is still far too fast for the eye to really capture, but the speed of the light as it passes through the stone can have some interesting effects on the shine of the stone. In comparison, the refractive index of moissanite is anywhere from 2.65-2.69. This can actually cause the stone to give off a \u2018disco-ball\u2019 appearance, as the shine can be overbearing at times. Since cubic zirconias are lower on the index than diamonds(sitting at 2.15-2.18), they reflect an excess of colored light, resulting in a \u2018rainbow effect.’<\/p>\n\n\n\nSynthetic Diamonds<\/h2>\n\n\n\n
How Do You Tell the Difference?<\/h2>\n\n\n\n
Durability<\/h3>\n\n\n\n
Refractive Index<\/h3>\n\n\n\n